Description

      GW5  series Outdoor High Voltage Disconnectors consists of three single phase, V type for each phase, symmetrical angle  is 50°, disconnect switch is made  of pedestal, post insulator and electric part. They  are used in no-load condition to switch off the electric circuit and isolate  electrical equipment, such as high voltage bus, circuit breaker etc, and high  voltage line up to 252kV power system.

      GW5-40.5/72.5/126/252 outdoor high voltage disconnecting switch is used to make or break high voltage circuit in rated voltage 40.5kV, 72.5kV, 126, 252kV, AC 50/60Hz electric system. It can open and close small capacitance and inductive current. This disconnecting switch accords with standards: IEC62271-103 High voltage switches. GB1985: AC High voltage disconnect switch and earthing switch and IEC 60694 & GB/T11022: Common technical requirements of HV switchgear and control equipment.

Environment  condition
 - Ambient temperature: max +40°C min -25°C
 - Altitude: ≤1000m
 - Wind pressure: ≤700Pa (equals to wind speed 34m/s)
 - Air contamination degree: IV degree

- Earthquake intensity: ≤8 degree
 - No corrosive or flammable gas, no frequent violent vibration

Technical  Data

Outline & Mounting Dimensions 

1.Connector  base      2. Main contact   3. Main touch finger  4. Connector base

5. Contact  touch finger  6. Post insulator  7. Limit plate        8. Earthing knife